The techniques of the method of the coupled modelling was substantially extended and used for solving problems connected with underground constructions for various materials and appropriate structural systems. In principle, a combination of linear effects of the external loading and material and time-dependent nonlinear change in structures was considered. Assessment of rock behaviour in surrounding of utility tunnels, solution of the structural strength below foundation, back analysis of reinforced soil slopes and studies of slopes endangered by groundwater were carried out., Petr Procházka and Jiřina Trčková., and Obsahuje bibliografii
Uranium deposits, between which gas storage are being designed, the Rožná deposit and Olší deposit, are situated on the east edge of the Strážek Moldanubicum in Bohemian Masiff. Based on structural analysis it was possible to carry out the first rough prediction of potential weak zones in the rock mass. The structural analysis was also one of the supporting materials for determining the geometry and design method for the mine workings for the gas storage and for the advancing exploration of the gas storage region. Until now, the measurement of foliation planes and discontinuity planes in the survey crosscut V1-XXI and in a survey connecting gate GR1-XXI has been carried out. The results of interpretation of the measurement and monitoring of ductile elements (foliations) and joints (ruptures) as well as dislocations interpretation from the mine maps can be summarized and quoted in the contribution., Jiří Ptáček, Rostislav Melichar, Antonín Hájek, Petr Koníček, Kamil Souček, Lubomír Staš, Petr Kříž and Josef Lazárek., and Obsahuje bibliografii
The irregular distribution of stress in rock mass is a decisive factor for the origin of rock bursts. Besides, a sound knowledge of stress distribution is very important in the excavation of mine workings. Stress state is affected both by natural stress, including the gravitational, tectonic, hydraulic and residual stress and the stress induced by mining operations. Natural stress fields are defined by their geological structure and rock properties. It is important in mining practice to understand that there is a close relationship between recent and residual tectonic stress, as defined by tectonic evolution and tectonic structure. Since 1994, a large number of horizontal stress measurements have been carried out at a depth of 600 m to 800 m under the surface. The application of the results obtained from the measurements of stress and their comparison with the results of structural analysis and their generalization for the Karviná subbasin can be an important contribution to optimize the timespace designs of the mining activity., Petr Waclawik, Jiří Ptáček and Radomír Grygar., and Obsahuje bibliografii
Integration between magnetic and gravity data at the Zelten platform, the southeast part of Sirt Basin Libya. Zelten Platform is first discovered oil field in Libya. It shows numerous geological structures of different tectonic events. The methods adopted can assist in locating the hidden subsurface structures. The platform is characterized by the NW-SE trending rift that belongs to the Early Cretaceous age (during the collapse of Sirt Arch). The study aimed to define the structural geology that assisted in the development of future exploration in this area. The analyses utilized several filtering and transformation algorithms to help in structural modeling. For instance, the total horizontal gradient and tilt angle derivative were applied for the edge detection of the tectonic boundaries. The results show NW-SE and NNW-SSE patterns that represents faults that controlled the positions of the troughs and platforms at the Sirt basin. On the other hand, Euler deconvolution and 2D forward modeling were utilized to determine the depth of the basement. The Integrated models deduced revealed that the main faults trends are NW-SE which refer to the rift phases and crustal extension period that occurred during the Mesozoic time (early cretaceous). Also, the basement depth ranges from 6.5 km to 8 km according to the structures that affected the study area., Abdelhakim Eshanibli, Amin Khalil, Abdellatif Younis and Hussin Ghanoush., and Obsahuje bibliografii
Preferential flow paths in the crust, as caused by the presence of the Luchlompolo fault in the drilled section of the Kola Superdeep Borehole (SG-3) and the dip angle of the rock structural elements (layering, schistosity, banding), are favourable for migration of deep fluids to the Earth’s surface. An investigation of the structure, anisotropy and permeability of rocks under PT-conditions in the SG-3 section, in addition to the occurrence of He-isotopes, reveals that the high-permeability zones of the exposed crustal segment are related to two important structural elements of the section: in the upper zone - to the Luchlompolo fault, in the lower one to the contact between the Proterozoic and Archaean complexes. The obtained results on the rock samples from SG-3 indicate a rough correlation between permeability and elastic anisotropy of various rock samples. Simulating increased PT-conditions, corresponding to the relevant depths of 6-8 km document the overlapping temperature and pressure effect, i.e. resulting in a sharp decrease of rock permeability., Felix F. Gorbatsevich, Serafim V. Ikorsky and Andrey V. Zharikov., and Obsahuje bibliografii
This paper presents the subject related to the technology of creating fractures into a rock, as well as the subject related to the effect of the proppant embedment phenomenon on the effective packed fracture in a reservoir rock. This phenomenon occurs after the performed hydraulic fracturing treatment of hydrocarbon reservoirs, during closing of the rock mass. A key part of this experiment was to investigate the depth of proppant grains penetration into the fracture wall (shale rock) and size of damage to the fracture wall surface. The embedment phenomena effects on decrease in the width fracture packed with proppant. The tests were performed for shale rock initially soaked with fracturing fluid, lightweight ceramic proppant grains with a grain size of 0.600÷0.300 mm (medium diameter of proppant grains of 0.450 mm), low surface concentration of proppant of 2.44 kg/m2. Time of exposure of proppant grains to compressive stress of a value 48.3 MPa for 6 hours at 70 oC. Test results indicate that the developed testing methodology may be used for corrected evaluation of the fracturing fluid as well as proppant in hydraulic fracturing treatment of unconventional reservoirs, especially shale rocks. and Maslowski Mateusz, Kasza Piotr, Wilk Klaudia.
To obtain the starting point for theoretical numerical computations the fibre reinforced concrete construction properties, adhesion of cement mixture with steel and polypropylene fibres and changes in its tension properties commensurate with number and weight percentage in the tested specimen were tested under laboratory conditions., Jiřina Trčková and Karel Řezba., and Obsahuje bibliografické odkazy
Evaluation of seismic loading in urban areas is not a simple process. The horizontal to vertical spectral ratio method technique has been often used for determination of site effect recently. Results from the re-interpretation of mining induced seismic events from Karviná region in frequency domain using archival databases will be presented in this study material. Also, spectra of continuous records (a bout two days) and evolution of spectra within a moving time window of the length 10 seconds are presented. These continuous records were registered on two places with different geological conditions., Zdeněk Kaláb and Alexey A. Lyubushin., and Obsahuje bibliografické odkazy
Generally, rock material failure is controlled by cracks under specific conditions. The study of rock fracture toughness belongs to the current frequent directions of research in the area of rock failure. The present paper describes the effects of parameters influencing the resultant properties of rock materials (bending rate, rock moisture) during fracture toughness measurement of different kinds of rocks (sandstone, marble, granite). The highest fracture toughness values were found in the marble samples. This is probably due to the inner structure of analysed marble, which is composed of only one mineral (calcite) and also has a lower porosity than the used granite. The lowest fracture toughness values were found in the sandstone sample, and reached c. 17-30 % of the measured fracture toughness values of the analysed granite and marble samples. As in the case of the other mechanical properties of rocks (e.g. uniaxial compressive strength) also in the case of higher sandstone (carboniferous) moisture the fracture toughness values decrease and its deformation ability increases. Preparation of samples for fracture toughness tests and performance of these tests are more complicated than in the case of tensile tests (e.g. the Brazilian test) and therefore this contribution presents a comparison between fracture toughness of analysed rocks and tensile strength values. The measured data in this study considering the fracture toughness tests and Brazilian tests were compared with results published by Zhang (2002)., Leona Vavro and Kamil Souček., and Obsahuje bibliografii
Using the FLAC3D numerical simulation method, the characteristics of mining stress evolution, fault activation patterns, and fault energy evolution characteristics are simulated and analyzed in the process of the footwall and hanging wall working face heading to a normal fault. The study shows that the fault cut off the mining stress propagation of overlying strata, and the stress blocking effect due to the fault is evident. When working faces head towards a fault, the abutment pressure and the vertical stress of the surrounding rock increase first and subsequently decrease. The abutment pressure of the coal wall and fault is highest when the distances to the fault are 40 m and 30 m for the footwall and hanging wall working faces, respectively. Moreover, the hanging wall mining stress is higher than the footwall mining stress. Fault activation in high-located strata precedes that in low-located strata when working faces head towards the normal fault. Energy is gradually accumulated before unstable fault events take place because of mining, and fault instability quickly releases a lot of energy. The mining stress concentration and fault activation due to faults easily result in rock bursts and mine seismicity, Wu Quan-sen, Jiang Li-shuai and Wu Quan-lin., and Obsahuje bibliografické odkazy