Classical Russian pendulum seismometer S-5-S was modified for recording of the rotational components of ground motion around the vertical or horizontal axes; the modified sensor is denoted here as S-5-SR. Experimental field testing of the S-5-SR sensor started in December 2010 in the Karvina coal region that is known as an area of intensive mining induced seismicity. First seismic station was installed in Doubrava village characterized by thick sedimentary layers. Next seismic station was installed in Orlova village, in different local geological conditions, i.e. in region without sedimentary layers. More than 200 mining induced seismic events were recorded on each seismic station during the period of six months of seismic monitoring. The recorded wave patterns confirm the existence of rotational ground motion components in this region; the strongest recorded value of this component exceeded 1 mrad.s-1. Analysis of the obtained records is presented in this paper., Zdeněk Kaláb, Jaromír Knejzlík and Markéta Lednická., and Obsahuje bibliografii
The paper presents selected results of seismological observations in Silesia and northern Moravia between 01/2004 - 08/2008, which are based on interpretation of three-component digital recordings at solitary seismic stations operated by the Institute of Geonics of the ASCR Ostrava (IGN) distributed in the region under investigation. Five seismic stations had recorded local tectonic seismic events in a continuous regime until 12/2005, when the grant project GA CR No. 205/03/0999 terminated. Meanwhile, the Ostrava - Krásné Pole (OKC) seismic station have continued in operation as a part of the Czech regional seismological network since 1983 up to present. Other three stations have been operating in a so-called triggered regime. At the mid-January 2007, seismic station in Klokočov village was re-opened in continuous regime. During 55 months of observation, 90 tectonic events have been detected at one or more seismic stations mentioned above. However, database of the Institute of Physics of the Earth of the MU contains more than 640 microearthquakes during the same time. This discrepancy is caused mainly due to a higher concentration of microearthquake foci distributed all over the western part of the region under investigation where the IPE seismic stations are situated. On the other hand, the IGN seismic stations are spread predominantly within the eastern part of the territory, i.e. relatively far from the recent foci, and moreover, some stations are operated using the triggered regime., Karel Holub, Zdeněk Kaláb, Jaromír Knejzlík and Jana Rušajová., and Obsahuje bibliografii
Experimental geomechanical and seismological measurements are performed in the medieval Jeroným Mine near Čistá (Sokolov district). The main aim of this activity is geomech anical stability evaluation of this monument. Periodical monitoring was started in 2001 whereas quarterly period was applied (measurement of crack development in the mine working, development in changes in convergence cross-sections of linear and spatial workings and fluctuations of water levels in underground spaces). Seismological monitoring was started during reconstruction of partly impassable drainage adit. At present, selected parts of described geomechanical system are newly instrumented to obtain continuous information. Data obtained from periodical and continuous monitoring are presented in this contribution. Interpretation of seismological data on both natural and technical seismicity and fluctuations of water levels is presented in details., Zdeněk Kaláb, Jaromír Knejzlík, Robert Kořínek, Radovan Kukutsch, Markéta Lednická and Petr Žůrek., and Obsahuje bibliografické odkazy
The essential point for seismological observation in the northern part of Moravia, Czech Republic, is a permanent seismic station Ostrava - Krásné Pole (OKC) that is a part of the Czech regional seismological network (hereafter CRSN). Institute o f Geonics AS CR, v.v.i., has also operated temporary seismic stations in this region since 1997. Current seismological stations are located in an abandoned mine working located in Zlaté Hory and in cellars in Klokočov and castle Raduň near Opava. The natural seismicity is after the swarm of microearthquakes in the vicinity of Opava in 1993 very low now. In region under discussion, seismic manifestations generated by mining induced seismicity in Upper Silesian Coal Basin (both Karviná an d Polish parts) and in Legnica-Głogów Copper District (LGOM) are also detected. Significant part of observations in this region is made by the Institute of Physics of the Earth (hereafter IPE), Masaryk University Brno, and about 1000 microearthquakes have been detected during the last ten years with maximum local magnitude up to 1.9., Zdeněk Kaláb, Jaromír Knejzlík and Karel Holub., and Obsahuje bibliografické odkazy
Russian electrodynamic seismometer named S-5-S is adaptable for measurement of rotational ground motion. In this paper brief information about mentioned adaptation is presented. Initial results from experimental m easurement in Karviná region in 2011 with high mining induced seismicity are documented. Measured values for the horizontal component reached up to 1 mrad s-1 , while the seismic energy of these events did not exceed the value of 10 5 J and hypocentral distances were within 2 km., Zdeněk Kaláb and Jaromír Knejzlík., and Obsahuje bibliografické odkazy
The oldest mine cavities of the Jeroným Mine were already mined out more than 400 years ago. That is why it is necessary to determine the stability of individual parts of underground spaces. The assessment of stability of mine cavities is based on the long-term monitoring of chosen parameters. A distributed measurement network has been operated here using several different types of sensors. A laser distance meter that is used for measuring the height of a large chamber is one of these sensors. The results obtained from this monitoring are presented. Even if no apparent correlation seems to be visible between Earth’s tides and LDM variations, some features of recorded data, like dynamical frequency crossover in the power spectrum, could be due to the tidal cycles of the Earth., Zdeněk Kaláb, Markéta Lednická, Jaromír Knejzlík and Luciano Telesca., and Obsahuje bibliografii
Using of shaped conical borehole bottom to determination of the stress tensor changes induced by changing of geomechanical situation is described in this paper. The measured strain changes on gauge probe are caused not only by the stress changes evocateg by progress of long wall. The some deformation started imediatelly after instalation when the long wal didn't move. In paper are discussed the eventu alities of this phenomenon too., Lubomír Staš, Kamil Souček and Jaromír Knejzlík., and Obsahuje bibliografické odkazy
Distributed control and measurement system for evaluation of hydrologic, geomechanical and other parameters has been built up in the medieval ore mine Jeroným. The instrumentation is generally based on commercial measurement and control kit and sensors. Technique of implementation of special sensors, e.g. laser distance meter and/or CCBM probe for measurement of rock massif stress changes, is also described. The distributed system is integrated into the existing seis mic recording station equipped by data transmission via GSM network. Comprehensive monitoring system is modular in order to have possibility to change the system configuration., Jaromír Knejzlík and Zdeněk Rambouský., and Obsahuje bibliografické odkazy
Compact conical strain gauge probe for borehole over-coring rock massif stress measurement (CCBO), based on experiences of K. Sugavara and Y. Obara, has been developed in Institute of Geonics ASCR, v.v.i. from 2004. First generation of CCBO is equipped by simple electronic circuit which requires continuous communication with control computer in the course of measurement. Prototypes of this type probes are used for long term stress changes monitoring induced by longwall advancement in mine. Solving of continuous data communication through rotating drilling tool filled by wash water in course of over-coring is very difficult technical task, which is not possible to solve in terms of grant project. To avoid this problem a development of second generation of CCBO equipped by microprocessor and internal data logger was initialised. Simplified modification of CCBO is developed as a probe for long-term monitoring of rock massif stress changes (Compact Conical Ended Borehole Monitoring - CCBM). Design of both models probes, discussion of measurement errors and technique of sensitivity self-calibration is described., Jaromír Knejzlík, Zdeněk Rambouský, Kamil Souček and Lubomír Staš., and Obsahuje bibliografii
A grant project for the period 2003-2005, supported by the Grant Agency of the Czech Republic, was set up to determine properties of seismic waves and the structure of the uppermost part of the Earth´s crust in the territory of northern Moravia and Silesia. Quarry blasts and mining induced seismic events served as seismic sources. Permanent, temporary and portable seismic stations were used for the monitoring of these seismic events. During the experiments local microearthquakes were also detected and localized. For the complex evaluation of seismic wave features, data of the CELEBRATION 2000 and SUDETES 2003 refraction experiments were incorporated, as well. The velocity-depth dependence of body waves was searched by joint inversions of travel times of Pg/Sg phases. A special feature of the wave trains, generated by quarry blasts, was a pronounced dispersive character of short-period Rayleigh surface waves. These waves enabled us to establish their dispersion curves, on the basis of which the structure of superficial layers was determined down to a depth of several hundreds of meters., Karel Holub, Jaromír Knejzlík, Bohuslav Růžek, Jana Rušajová and Oldřich Novotný., and Obsahuje bibliografii