The study of natural materials, a creating of their similarities from the point of view of constructions, structures and materials is relatively new and a perspective field connecting results of scientific research of biologists, chemists, physicists, material engineers, constructors and designers. At present day a lot of these results were transferred into the industry application. How we can see natural materials could become a source of inspiration on a field of materials, technologies and constructions as well as on the field of nanotechnologies. and Studium přírodních materiálů, vytváření jejich analogií z hlediska konstrukcí, struktur i materiálů je relativně novým a neobyčejně perspektivním oborem, který dokáže spojovat výsledky bádání biologů, chemiků, fyziků, materiálových inženýrů, konstruktérů a designérů. V současné době řada výsledků těchto výzkumů dosáhla i svých průmyslových aplikací. Jak je postupně zjišťováno, přírodní materiály se nám mohou stát zdrojem inspirace v oblasti materiálů, technologií a konstrukcí stejně tak jako v oblasti nanotechnologií.
Thermal silica-based geopolymer composites reinforced by approximately 45 vol.% of unidirectional carbon HTS 5631 1600tex 24K fibers were synthesized and fabricated at optimal range of curing conditions, the effects of thermal exposure in a forced air furnace at high temperatures up to 1000 °C for 1 hour on the thermal-mechanical properties of the geocomposites were studied. The flexural properties of the resulting composites were determined on a universal testing machine under three-point bending mode in accordance with ASTM C 1341-06 and the results show that the mechanical properties of geocomposite retained nearly 50 to 60%, after thermal exposure up to 1000 °C, in comparison with these of the geocomposite tested at 20 °C. The microstructure of the geocomposites was analyzed by means of Scanning Electron Microscope (SEM) after calcination, at temperature higher than 800 °C the microstructure of geocomposite looks like foamed composites and the adhesion between the fiber and matrix still show very well. Energy Dispersive X-ray Analysis (EDX) was used to determine the initial reaction layer on the fiber will be presented as well. and Termické geopolymerní kompozity na bázi křemene zesílené asi ze 45 objemových procent jednosměrovými uhlíkovými vlákny HTS 5631 1600tex 24K byly syntetizovány a vyrobeny za optimálního rozsahu vytvrzovacích podmínek. Byl studován vliv teplotní expozice sálací pece až 1000 °C po dobu jedné hodiny na tepelně mechanické vlastnosti geokompozitů. Ohybové vlastnosti získaných kompozitů byly zjištěny pomocí univerzálního zkušebního stroje ve tříbodovém ohybovém modu v souladu s ASTM C 1341-06. Výsledky ukazují, že mechanické vlastnosti geokompozitů se po teplotní zátěži až 1000 °C zachovávají z 50 - 60 % ve srovnání se zkoušenými kompozity při 20 °C. Mikrostruktura geokompozitů po kalcinaci byla analyzována pomocí elektronového skenovacího mikroskopu (SEM) při teplotě nad 800 °C. Mikrostruktura geokompozitů připomíná pěnové kompozity, adheze mezi vlákny a matricí je stále velmi dobrá. Rovněž bylo ukázáno, jak byla užita energetická disperzní rentgenová analýza (EDX) pro určení výchozí reakční vrstvy.
Epoxy resins are polymer materials reaching their final mechanical parameters after creating unchangeable inner structure. Time 48 hour and temperature 25°C are considered to be sufficient for the final mechanical parameters achievement. But the final structure creating lasts longer. An internal damping observation can be suitable for the purpose of material changes characterization. and Epoxidové pryskyřice jsou polymerní materiály, které dosahují svých konečných mechanických parametrů až po vytvoření již dále neměnné vnitřní struktury. Doba 48 hodin při teplotě vytvrzování 25 °C je obecně považována za postačující k zajištění těchto parametrů. Tvorby konečné struktury ale probíhá mnohem déle. Změny, ke kterým v materiálu dochází, jsou dobře postižitelné stanovením jeho vnitřního tlumení.
The article describes a process and results of equisetum arvense evaluation as a plant interesting from the point of view of its construction, structure and chemical composition and its origin in the period of the Palaeozoic. A computed micro tomography, a scanning electron microscopy complemented by an energy dispersive analysis and a transmission electron microscopy was used to experimental evaluation. A characteristic construction of plant segments, a specific structure identified in different parts of plant and chemical composition showing the presence of amorphous silicon dioxide nanoparticles was described on the performed analysis basis. and Článek popisuje postup a výsledky hodnocení přesličky rolní (equisetum arvense) jako rostliny zajímavé z hlediska své stavby, struktury, chemického složení a jejího původu sahajícího do období prvohor. Pro experimentální hodnocení byla použita počítačová mikrotomografie, rastrovací elektronová mikroskopie, doplněná o energiově disperzní analýzu, a transmisní elektronová mikroskopie. Na základě provedených analýz byla popsána charakteristická stavba rostlinných segmentů, specifická struktura identifikovaná v odlišných místech rostlinných částí a chemické složení vykazující přítomnost amorfních nanočástic oxidu křemičitého o rozměrech v jednotkách nanometrů.