The infrared thermography has been successfully applied as a tool for high resolution imaging in different hydrological studies. This exploratory experimental study aimed at evaluating the possibility of using infrared thermography to determine the diameter of raindrops. Rain samples are collected on a pre-heated acrylic board, which is exposed to rain during an instant, and thermograms are recorded. The area of the thermal stains (''signatures'' of the raindrops) emerging on the board is measured and converted to drop diameters, applying a calibration equation. Diameters of natural raindrops estimated using this technique were compared with laser disdrometer measurements; the Nash-Sutcliffe efficiency coefficient was used for evaluating the match between the resulting histograms of drop size distribution. Results confirm the usefulness of this simple technique for sizing and counting raindrops, although it is unsatisfactory in light rain or drizzle.
Accurate measurement of shallow flows is important for hydraulics, hydrology and water resources management. The objective of this paper is to discuss a technique for shallow flow and overland flow velocity estimation that uses infrared thermography. Laboratory flumes and different bare, vegetated and paved field surfaces were used to test the technique. Results show that shallow flow surface velocities estimated using thermal tracers and infrared technology are similar to estimates obtained using the Acoustic Doppler Velocimeter; similar results were also obtained for overland flow velocity estimates using thermography, here comparing with the dye tracer technique. The thermographic approach revealed some potential as a flow visualization technique, and leaves space for future studies and research.