Phenolic compounds are common pollutants found particularly in the effluents from petroleum and petrochemical, coal conversion, and phenol producing industries. Due to their toxicity and carcinogenity, water and wastewater containing phenolic compounds must be treated before being used and discharged for receiving water bodies. There is a growing interest in using low-cost and commercially available materials for the adsorption of organic compounds. Clay minerals have great potential to remove phenols in water due to efficient sorbents which can be used as alternative adsorbents to replace the costly activated carbon. They are widely applied in many fields of adsorption technology including the removal of amines, metals, ketones, phosphates, chlorophyll, non-ionic contaminants, and organic pigments/dyes. Montmorillonitic smectites, {(Na,Ca)0.33(Al,Mg)2(Si4O10)-(OH)2.nH2O} are one of the natural clay minerals that have specific surface chemical properties. In this study, a factorial experimental design technique was used to investigate the adsorption of phenol from water solution on montmorillonite. Factorial design of experiments is employed to study the effect of three factors: pH (2.0 and 8.0), montmorillonite dosage (0.1 and 1.0 g/L) and initial low and high concentration (10 and 100 mg/L). The efficiency of phenol adsorption was determined after 60 min of treatment. Main effects and interaction effects of three factors were analyzed by using statistical techniques. A regression model was found to fit the experimental data very well. Through using the Student’s t-test, analysis of variance, F-test and lack of fit to define most important process variables affecting the percentage phenol adsorption., Feza Geyikçi and Semra Çoruh., and Obsahuje bibliografii
Copper flotation waste which is the product pyrometalurgical production of copper from copper ores contains materials such as iron, alumina, calcium oxide, silica, etc. Copper flotation waste generally contains a significant amount of Cu together with trace elements of other toxic metals such as Zn, Co and Pb. A variety of techniques can be used for decontaminating and remediating copper slag. Environmental reme diation technologies include in situ or ex situ techniques for decontaminating the polluted fields, such as soil-washing, physical separation, phytoremediation and leaching. The aim of the present study is to investigate the removal of the copper from copper flotation waste leachant using sepiolite. 2 3 full factorial design was employed to study the effect of three factors which are contact time, adsorbent dosage and pH at two levels., Semra Çoruh, Feza Geyikçi and Ufuk Çoruh., and Obsahuje bibliografické odkazy